Rocket bunny легендарный обвес от кей миура

Оглавление

Step 8 – Final Touches
- Where There’s 1 Bunny There’s ALWAYS plenty more.
STEP 4
- - - - *And always be aware of your file because the last thing you want to do is be filing away whilst the other end is inadvertently filing away a much needed section elsewhere!
Мастерская Кеи Миура — Рокет банни

Step 8 – Final Touches

Now it’s time to put your custom back together and add any Hot Wheels Decals and other racing livery you might want to add.

Not happy with your Rocket Bunny Kit? That’s fine because by using a fine paint brush or fine tipped permanent marker and marking the edges of the widebody kit we can turn our Rocket Bunny into a Liberty Walk kit.

Custom Huracan by @Carllector – thanks Douglas

Now that you have mastered the widebody custom AND the use of epoxy putty the sky is the limit! Go out there and let your mind wander – and then build wherever it takes you. Of course, now that you’ve made one sweet ass widebody kit you’ll probably want to make lots more. Mohammad did

That wouldn’t have been easy… It’s not easy being green after all

But what is this underbody bracing and diffuser action I see before me?!?!

THAT my friends is called Styrene, a product you’ll soon fall in love with and the subject of next weeks EPIC HOW TO GUIDE Stay tuned…

Where There’s 1 Bunny There’s ALWAYS plenty more.

There are actually a tonne of awesome customs already posted on the many YOUR CUSTOM HOTWHEELS posts so to attempt to bring them all over here as well would be, well it would be time consuming is what it would be and I ain’t bloody doing it!

What I do have however is a couple of customs that just happened to be published on My Custom Hotwheels Facebook Group around the same time I was putting this post together.

This first one comes to us courtesy of Mohd Azwandie Hussain and is another exquisite example of how awesome epoxy putty is.

This second one comes from someone who I have always admired and looked up to – as I am sure you have to. He is the master of his trade (which just happens to be ours too) and has produced some truly amazing wide-bodied customs in his day. Here are just a couple of them from a man who honestly needs no introduction,

Customs by Pisut Masanong ( @Masanong )

Not Diorama, DAYUMMorama

I’ll leave you with one last custom wide body build from Mass Putra (Customs) –
because next week you will be seeing plenty more as he along with Hadi ‘THE MASTER’ @Madworxkustom show us how to scratch build our own parts using esterino, the stuff we call styrene

widebodied Nissan 180sx by Mass Putra Customs

STEP 4

Once the putty has hardened it is time to go to work with our file(s) and start to give life and shape to our Rocket Bunny and/or generic Widebody kit. Note that this is one of those skills that really does improve with practice and time. I will share some of my first attempts in an upcoming post but needless to say they look more like steaming piles of … than widebodied custom hotwheels! Obviously some will pick it up faster than others (’tis the nature of life) but regardless – you keep working with the putty and file and soon you too will be creating epic creations up there with the likes of customisers like Pisut Masanong (to name but one of the multitudes of skilled customizers out there)

Mohammad as started to file away the rear guard. Baby steps guys

When filing away the guards the key thing to remember is BABY STEPS. If you take off too much you’re screwed – basically, so ensure even and clean lines by working very lightly AND only doing small sections at a time. It’s also helpful to hold the car up to your eyes every so often and look straight down and across it so as to ensure the lines of your filing are evenly distributed and balanced.

DO NOT try to file around the entire guard in one movement – rather keep the file as flat as possible and try to maintain this as you go.DO NOT push too heavily when filing as you instantly lose the sensitivity needed to maintain even and smooth lines.

*And always be aware of your file because the last thing you want to do is be filing away whilst the other end is inadvertently filing away a much needed section elsewhere!

Мастерская Кеи Миура — Рокет банни

Rocket bunny — Легендарный обвес рокет банни от Кеи Миура

Но как Миура удается превратить эти 3D-рендеры в реальность, слышу я ваш вопрос. Ну, для этого вам нужно следовать за мной в мастерскую, где и происходят умопомрачительные вещи.

Rocket bunny — Легендарный обвес рокет банни от Кеи Миура

Это особое место для Миуры – именно здесь он сделал себе имя и продолжает оставаться одним из самых лучших специалистов в данной отрасли в течение многих лет. В то время как почти все японские авиастроители все еще проектируют свои части вручную при помощи ваяльной глины, Миура может быстро создавать прототипы полномасштабных деталей в течение нескольких дней.